IT-1600 PC Based Oscilloscope with Digital Interface

IT-1600 is a combination of three instruments: a two-channel digital storage oscilloscope, a waveform generator, and a digital input-output. It can also be used as a spectrum analyzer. Its software runs on a host PC which provides several additional features also. Its features and performance specifications are as follows:

Description

IT-1600 is a combination of three instruments: a two-channel digital storage oscilloscope, a waveform generator, and a digital input-output. It can also be used as a spectrum analyzer. Its software runs on a host PC which provides several additional features also. Its features and performance specifications are as follows:

Technical Features:

Oscilloscope  
Channels 2 independent channels sampled simultaneously
Sampling Frequencies 20MSamples/second maximum
Vertical Resolution 10 bits per channel (1:1024)
Vertical Bandwidth 2 MHz
Vertical Input Range ±250mV to ±25V full scale
Vertical Gain Settings 7 settings, 50mV/div to 5V/div, in 1:2:5 sequence
Vertical Scale 10 major divisions
Horizontal Time Settings 20 settings, 100mSec/div to 50nSec/div, in 1:2:5 sequence
Horizontal Scale 10 major divisions
Input Impedance 1M Ohm parallel 27pF
Triggering Digital comparison with input signal
Memory Depth

Display Refresh Rate

1K Samples each channel

> 2 updates/second

Software Features Selectable Screen Capture

Cursor Readouts

Spectrum Analysis (FFT)

X-Y Plot

Auto Measurements etc.

Waveform Generator  
Frequency Range

Frequency Resolution

0.1Hz to 3MHz

0.1Hz

Output Amplitude +/-3V
Amplitude Control Hardware
Vertical Resolution 8 bits at all amplitude settings
Output Impedance 150 ohms
Waveforms Sine, Square, Triangle, Ramp (Sawtooth)
Arbitrary Waveform 8 bit resolution vertical, 256 time points
Noise

 

Pseudo-random, 8 bit analog noise, sample rate 12.5Mz, sequence length 21 seconds
Digital I/O  
Output 8 bits, GUI (Graphical User Interface) controlled, 5 volt
Input 8 bits, GUI indicators, 5 or 3 volt
Pulse waveform Variable duty cycle at frequency 35Hz to 72kHz
Interrupt Selectable level and slope, illuminates ’Interrupt’ indicator
Indicators

 

Power LED (Green) , Activity LED (Red)
Interface USB 1.0 or 2.0