IT-1600 PC Based Oscilloscope with Digital Interface

Technical Features:
Oscilloscope

  • Channels: 2 independent channels sampled simultaneously
  • Sampling Frequencies: 20MSamples/second maximum
  • Vertical Resolution: 10 bits per channel (1:1024)
  • Vertical Bandwidth: 2 MHz
  • Vertical Input Range: ±250mV to ±25V full scale
  • Vertical Gain Settings: 7 settings, 50mV/div to 5V/div, in 1:2:5 sequence
  • Vertical Scale: 10 major divisions
  • Horizontal Time Settings: 20 settings, 100mSec/div to 50nSec/div, in 1:2:5 sequence
  • Horizontal Scale: 10 major divisions
  • Input Impedance: 1M Ohm parallel 27pF
  • Triggering: Digital comparison with input signal
  • Memory Depth: 1K Samples each channel
  • Display Refresh Rate: > 2 updates/second

Software Features:

  • Selectable Screen Capture
  • Cursor Readouts
  • Spectrum Analysis (FFT)
  • X-Y Plot
  • Auto Measurements etc.

Waveform Generator

  • Frequency Range: 0.1Hz to 3MHz
  • Frequency Resolution: 0.1Hz
  • Output Amplitude: +/-3V
  • Amplitude Control: Hardware
  • Vertical Resolution: 8 bits at all amplitude settings
  • Output Impedance: 150 ohms
  • Waveforms: Sine, Square, Triangle, Ramp (Sawtooth)
  • Arbitrary Waveform: 8 bit resolution vertical, 256 time points
  • Noise: Pseudo-random, 8 bit analog noise, sample rate 12.5Mz, sequence length 21 seconds

Digital I/O

  • Output: 8-bits, GUI (Graphical User Interface) controlled, 5V
  • Input: 8 bits, GUI indicators, 5 or 3V
  • Pulse waveform: Variable duty cycle at frequency 35Hz to 72kHz
  • Interrupt: Selectable level and slope, illuminates ‘Interrupt’ indicator
  • Indicators: Power LED (Green) , Activity LED (Red)
  • Interface: USB 1.0 or 2.0

Description

IT-1600 is a combination of three instruments: a two-channel digital storage oscilloscope, a waveform generator, and a digital input-output. It can also be used as a spectrum analyzer. Its software runs on a host PC which provides several additional features also.