IT-230 Curve Tracer

Features:

  • Power Supplies Included
  • Required Waveform Generators Included
  • Current Limit Option Available
  • Polarity Control Option Available

Technical Features:

  • Collector Drain Sweep Voltage:
  • Frequency: 100Hz (2X line frequency)
  • Voltage: 11 steps, 5, 10, 20, 30, 40, 50, 60, 80, 100, 150 and 200V; accuracy + 10%
  • Sweep waveform: Full wave rectified
  • Current Limit: With current limiter, 0.5A maximum

Step Generator:

  • Number of steps: 7 (eight curves display)
  • Current per step: 0.1, 0.2, 0.5, 1.0, 2.0 mA; accuracy + 5%
  • Voltage per step: 0.1, 0.2, 0.5V; accuracy + 5%

Polarity switch:

  • Three modes of operation – NPN (n-channel), PNP (p-channel), DIODE
  • External Bias: One curve display

Description

The model IT-230 Semiconductor Curve Tracer is a high-performance test instrument. By combining the IT-230 with general-purpose scope, characteristic curves of all types of semiconductors can be accurately displayed.

The IT-230 is used for quality control, characteristic test and parameter measurement of semiconductors, in such places as factories, laboratories and schools.

The IT-230 is designed to test the following:

  1. Transistors: NPN, PNP, FET and MOSFET
  2. Thyristors: SCR, TRIAC, DIAC, UJT and PUT
  3. Diodes: rectifier, detector, saner and tunnel

General:

  • Power supply: 220VAC

Accessories:

  • 2 x Scope leads (BNC – banana plugs)
  • 4 x Test leads (banana plugs – clips) Black
  • 6 x Test leads (banana plugs – clips) Red
  • 1 x Instruction manual