IT-640 Electrical Power Utilization Trainer

Large energy consumers like industrial plants, processing plants and manufacturing units are required to provide compensation for reactive power used by them. Modern electrical control circuits also generate harmonics in the network.

This laboratory addresses the topics like reactive power compensation, reactive power controllers, measurement of electrical energy in three phase networks, cost of power consumed by the customers. These topics are analyzed from the theoretical point of view and also by means of practical examples.

Description

Large energy consumers like industrial plants, processing plants and manufacturing units are required to provide compensation for reactive power used by them. Modern electrical control circuits also generate harmonics in the network.

This laboratory addresses the topics like reactive power compensation, reactive power controllers, measurement of electrical energy in three phase networks, cost of power consumed by the customers. These topics are analyzed from the theoretical point of view and also by means of practical examples.

 

Features:

Module Based

Power Supplies Included

Flexibility to Perform Custom Experiments

Passive Components Included

Resistors, Capacitors and Inductors Included

Control Circuits Included

P.T. and other Passive Components Included

Protection Circuits Included

 

Description Module 6101.DUtilization
Resistive load IT-6004

1

Inductive load IT-6005

1

Three-phase squirrel cage IT-6009

1

Magnetic powder brake IT-6010

1

Brake control unit IT-6011

1

Load cell IT-6012

1

Optical transducer IT-6013

1

Universal base IT-6014

1

Three-phase power supply IT-6017

1

Power circuit breaker IT-6019

1

Reactive power controller IT-6032

1

Switchable capacitor battery IT-6033

1

Moving coil ammeter (1.25-205A) IT-6035

2

Moving iron voltmeter IT-6038

1

Power meter IT-6048

2

Power factor meter IT-6049

1

Three-phase kWh meter IT-6050

1

Three-phase power meter IT-6051

1

Three-phase kVArh meter IT-6052

1

Electronics Stop clock IT-Clock

1

Base Frame IT-2L

1

Leads (Accessory) IT-ACC

1 set

 

 

Experiments Included:

Power Factor Improvement

Demonstration of the manual operation on the control of reactive power at various inductive load

Demonstration of the automatic operation on the control of reactive power at various inductive loads and at different sensitivities

 

Energy Meters and Tariffs

Demonstration of the measurement of active energy consumption

Demonstration of the measurement of reactive energy consumption

Determination of the meters constant

Demonstration of the measurement of the maximum demand

Demonstration of load cut-off operation