The Hydraulic Bench with Flowmeter permits a varied experimental cross-section in the fundamentals of fluid mechanics. The unit provides the basic equipment for individual experiments, the supply of water in the closed circuit. The determination of volumetric flow rate and the positioning of the experimental unit on the working surface of the base module and the collection of dripping water.
The closed water circuit consists of the underlying storage tank with a powerful centrifugal pump and the measuring tank arranged above, in which the returning water is collected. The measuring tank is stepped, for larger and smaller volumetric flow rates. Flowmeters are used to measure small and large flow rates. The volumetric flow rates can also be measured using a stopwatch. The top work surface enables the various experimental units to be positioned easily and safely. A small flume is integrated in the work surface, in which experiments with weirs are conducted.
Specification
- Basic unit for supplying experimental units in fluid mechanics
- Closed water circuit with storage tank, pump and measuring tank
- Measuring tank divided in two for volumetric flow rate measurements
- Flowmeters for measuring volumetric flow rates
- Measurement of volumetric flow rates by using a stopwatch
- Work surface with integrated flume for experiments with weirs
- Work surface with inside edge for safe placement of the accessory and for collecting the dripping water
- Storage tank, measuring tank and work surface made of GRP.
Technical Data
Centrifugal Pump
Power consumption: 500~746W
Max. flow rate: upto 100L/min
Max. head: 21.5m
Storage tank capacity: 160L
Measuring Tank
At large volumetric flow rates: 40L
At small volumetric flow rates: 7L
Flume
LxWxH: 510x165x170mm
Flowmeters for measuring volumetric flow rates
Content: 5L
Stopwatch
Measuring range: 0…9h 59min 59sec
Scope of Delivery
1 stop watch
1 measuring beaker
1 instruction manual
1 base module (Hydraulic bench)
