The system consists of an air-cooled condensing unit with a hermetic compressor, high back pressure, high starting torque, Complete with: Suction and Discharge Service Valves; gauge manifold connections, and an integrated motor protector. The forced air, blow through, powder-coated evaporator has a detachable front panel and a galvanized sheet steel case. The evaporator has five fins per inch and is a finned coil type. The device contains a digital thermometer and can be thermally loaded to investigate performance; Thermostatic expansion valve with internal equalized, liquid line filter drier, liquid-vapour heat exchanger, high and low pressure switches, high pressure gauge, and low pressure compound gauge.
Specifications
- The base of the unit is made of stainless steel, and it is set on a steel frame.
- High back pressure, high starting torque hermetic compressor for air-cooled condensing unit
The unit comprises:
- Air cooled condensing unit with high back pressure, high starting torque hermetic compressor
Complete with:
- Suction and Discharge Service Valves
- Gauge Manifold Connections
- Built in Motor Protector
- Forced air, blow through type evaporator, with 15-watt fan motor. Powder coated galvanized sheet steel casing with removable front panel.
- Evaporator coil constructed from internally grooved copper tube, and fitted with aluminium fins at 5 FPI.
- Detachable Insulated hood with heat load: 100watts.
- K type thermocouple.
- Internally equalized Thermostatic Expansion Valve.
- Liquid Line Filter Drier.
- Heat Exchanger.
- High Pressure Switch.
- Low Pressure Switch.
- High Pressure gauge and low pressure compound gauge.