IT-1600 is a combination of three instruments: a two-channel digital storage oscilloscope, a waveform generator, and a digital input-output. It can also be used as a spectrum analyzer. Its software runs on a host PC which provides several additional features also.
Technical Features:
Oscilloscope
- Channels: 2 independent channels sampled simultaneously
- Sampling Frequencies: 20MSamples/second maximum
- Vertical Resolution: 10 bits per channel (1:1024)
- Vertical Bandwidth: 2 MHz
- Vertical Input Range: ±250mV to ±25V full scale
- Vertical Gain Settings: 7 settings, 50mV/div to 5V/div, in 1:2:5 sequence
- Vertical Scale: 10 major divisions
- Horizontal Time Settings: 20 settings, 100mSec/div to 50nSec/div, in 1:2:5 sequence
- Horizontal Scale: 10 major divisions
- Input Impedance: 1M Ohm parallel 27pF
- Triggering: Digital comparison with input signal
- Memory Depth: 1K Samples each channel
- Display Refresh Rate: > 2 updates/second
Software Features:
- Selectable Screen Capture
- Cursor Readouts
- Spectrum Analysis (FFT)
- X-Y Plot
- Auto Measurements etc.
Waveform Generator
- Frequency Range: 0.1Hz to 3MHz
- Frequency Resolution: 0.1Hz
- Output Amplitude: +/-3V
- Amplitude Control: Hardware
- Vertical Resolution: 8 bits at all amplitude settings
- Output Impedance: 150 ohms
- Waveforms: Sine, Square, Triangle, Ramp (Sawtooth)
- Arbitrary Waveform: 8 bit resolution vertical, 256 time points
- Noise: Pseudo-random, 8 bit analog noise, sample rate 12.5Mz, sequence length 21 seconds
Digital I/O
- Output: 8-bits, GUI (Graphical User Interface) controlled, 5V
- Input: 8 bits, GUI indicators, 5 or 3V
- Pulse waveform: Variable duty cycle at frequency 35Hz to 72kHz
- Interrupt: Selectable level and slope, illuminates ‘Interrupt’ indicator
- Indicators: Power LED (Green) , Activity LED (Red)
- Interface: USB 1.0 or 2.0
